The specific steps and operation methods for setting the picture-in-picture (PIP) function of the LED display mainly depend on the display model, video processor and corresponding control software used.
The following is a general guide for setting the picture-in-picture function based on the mainstream LED displays on the market:
I. Enter the picture-in-picture display mode
1. Key operation:
- Find the button marked "PIP" (Picture In Picture) on the video processor or control box of the display.
- Press the PIP button, and the indicator light above the button will light up, indicating that the picture-in-picture display mode has been entered.
- At the same time, the LED display will display the input signal corresponding to the background and the picture-in-picture, such as "background=V1, picture-in-picture=DVI", etc.
2. Software settings (if applicable):
- If the LED display supports settings through software, you can open the corresponding control software through the computer connected to the display.
- Find the picture-in-picture setting option in the software and set it according to the prompts.
II. Change the PIP content
1. Select input signal:
- In PIP mode, select a different input signal or the current input signal by pressing the button to set the channel image as PIP.
- The PIP content can be other input signals different from the current background image or the current input signal.
2. Adjust size and position:
- Most video processors allow users to adjust the size and position of the PIP window.
- Through the corresponding buttons or software interface, the PIP window can be freely adjusted to meet different display needs.
III. Change background
1. Turn off PIP mode:
- First, you need to press the PIP button to turn off the current PIP display mode.
2. Select background signal:
- After turning off PIP mode, select the signal you want to use as the background by pressing the button.
3. Re-enter PIP mode:
- Press the PIP button again to enter PIP mode and reselect the PIP content.
IV. Notes
- Signal source: Make sure that all input signal sources used are properly connected to the video processor or control box of the LED display.
- Resolution and format: Check whether the resolution and format of the PIP content and background content are compatible to avoid display abnormalities.
- Operation manual: Different brands and models of LED displays may have different operation methods and steps. It is recommended to refer to the specific operation manual or contact the manufacturer's technical support for setting.
V. High-authority source information
Although the specific content of the high-authority source is not directly quoted in this answer, the above steps and operation methods are summarized based on the general functions and operation habits of the mainstream LED display screens on the market.
In actual applications, it is recommended to refer to the official documents of the LED display screen used or the information provided by the technical support.
Through the above steps, you can successfully set the PIP function on the LED display screen to achieve the effect of multiple screens displaying at the same time.