The specifications of the P2 LED screen mainly include the following aspects:
1. Basic parameters
Pixel pitch: 2mm, which is one of the main features of the P2 LED screen and determines its high-definition display effect.
Pixel density: There are about 250,000 pixels per square meter, which allows the P2 LED screen to present a delicate picture even when viewed at close range.
2. Module and cabinet size
Module size: There are mainly two specifications, one is 300mm×168.75mm (16:9 standard size), and the other is 256mm×128mm or 320mm×160mm. The size and resolution of the module determine the display effect and installation convenience of the entire screen.
Case size (if a cabinet structure is used): A cabinet is usually spliced by four modules, so the cabinet size is 600mm×337.5mm (corresponding to the module size of 300mm×168.75mm), which also follows the 16:9 ratio. The cabinet design makes installation more convenient and improves the flatness of the screen.
3. Display effect and performance
Resolution: Depending on the screen size and module specifications, the resolution of the P2 LED screen will also vary. For example, to achieve 2K resolution (1920×1080P), the width and height dimensions must be 3.84m and 2.176m respectively; and to achieve 4K resolution (3840×2160P), the width and height dimensions must be 7.68m and 4.352m respectively.
Brightness: The brightness of the P2 LED screen is usually above 800cd/m², and some products can even reach 900cd/m² or higher. High brightness allows the screen to present a more vivid and lively picture in an indoor environment.
Contrast: Some high-end P2 LED screens use pure black lamp beads with a contrast ratio of up to 8000:1, better color consistency, brighter colors, and more delicate picture quality.
Field of view angle: The field of view angle of P2 LED screen is usually about 160 degrees (left and right angles and downward angles), which allows the audience to clearly see the content on the screen in a wide range.
Refresh rate and response time: P2 LED screens usually have a high refresh rate and fast response time, which can ensure smooth and smooth images without ghosting.
4. Other parameters
IP level: Indicates the protection level of the screen body. The most common one is IP45 level, which can resist a certain degree of dust and water splashes.
Power consumption: The power consumption of a square meter of P2 LED screen is about 750W to 1000W, depending on the design and configuration of the product.
Lifespan: The service life of P2 LED screens is usually very long, which can reach more than 100,000 hours.
Control method: P2 LED screens generally use a synchronous display system, which consists of a sending card and a receiving card, and supports multiple control methods such as WINXP computer + control software hardware + playback software and hardware, etc.
In summary, P2 LED screen has the advantages of high definition, high brightness, high contrast, wide viewing angle and long life, and is widely used in conference rooms, exhibition halls, marketing centers, lecture halls, hotels and other places. When purchasing, it is necessary to choose the appropriate specifications and configurations according to the specific application scenarios and needs.