Question

Differences between P3 vs. P4 vs. P8 vs. P10 outdoor LED display

Answer 1

The main differences between the outdoor LED display screens P3, P4, P8, and P10 are reflected in pixel pitch, resolution, brightness, optimal viewing distance, and application scenarios. The following is a detailed analysis of the differences between the four:

1. Pixel pitch

P3: The pixel pitch is 3mm, that is, the distance between each pixel is 3 mm.

P4: The pixel pitch is 4mm, slightly larger than P3.

P8: The pixel pitch is 8mm, twice that of P4.

P10: The pixel pitch is 10mm, the largest in this series.

The pixel pitch directly affects the resolution and clarity of the display. The smaller the pitch, the more pixels per unit area, the more delicate the picture, and the higher the resolution.

2. Resolution and clarity

* Due to the difference in pixel pitch, the P3 display has the highest resolution and the most delicate picture.

* Followed by P4, the resolution and clarity are slightly inferior to P3.

* The resolution of P8 and P10 is relatively low, and the picture is more granular.

3. Brightness

* Outdoor LED displays usually require higher brightness to cope with harsh environments such as direct sunlight.

* In terms of brightness, although the specific values ​​may vary from product to product, in general, displays with smaller dot pitches such as P3 and P4 will be equipped with higher brightness to ensure clear visibility of content in outdoor environments.

* Due to their larger dot pitches, P8 and P10 may be slightly inferior to P3 and P4 in brightness, but they can also meet most outdoor use needs.

4. Optimal viewing distance

P3: Due to its higher resolution and clarity, the optimal viewing distance of P3 displays is relatively far, usually over 6 meters. This means that the image remains clear when viewed at a longer distance.

P4: The optimal viewing distance of P4 displays is relatively close, usually over 5 meters. Viewers can watch screen content at a closer distance without seeing obvious pixel graininess.

P8 and P10: Due to their larger dot pitches, P8 and P10 displays have a longer optimal viewing distance and are suitable for viewing at a longer distance.

5. Application scenarios

P3: Suitable for outdoor advertising, stadiums, large-scale events and other occasions that require long-distance viewing and have high requirements for clarity.

P4: Suitable for indoor or semi-indoor environments, such as shopping malls, banks, schools, hospitals, etc., as well as outdoor environments where resolution requirements are not particularly high.

P8 and P10: Due to their larger dot pitch and longer optimal viewing distance, they are more suitable for large outdoor displays for long-distance viewing, such as squares, commercial centers, etc.

Summary

Outdoor LED display screens P3, P4, P8, and P10 have significant differences in pixel pitch, resolution, brightness, optimal viewing distance, and application scenarios. When choosing, you should decide which model of display screen to use based on specific application requirements and environmental conditions to ensure the best display effect and user experience.

Answer 2

The P8 LED display is a high-performance outdoor display with an 8mm pixel pitch, that is, the distance between each pixel is 8mm. This display has the following significant features:

1. High definition: Due to the small pixel pitch, the P8 LED display can present a more delicate and clear image, suitable for long-distance viewing.

2. High brightness: Designed for outdoor environments, the brightness can reach more than 6500nits, ensuring that it can still be clearly seen in various strong light environments.

3. Wide viewing angle: Both horizontal and vertical viewing angles can reach more than 140 degrees, ensuring that the audience can get good visual effects from multiple angles.

4. Waterproof and dustproof: With an IP65 level of protection, it can effectively resist the erosion of bad weather and environment and extend its service life.

5. Energy saving and environmental protection: It adopts a low power consumption design, which meets the requirements of modern energy saving and environmental protection, while reducing operating costs.

In addition, the P8 LED display also has the advantages of bright colors, high contrast, and good stability. It is widely used in outdoor advertising, information release, stage shows, conference presentations and other occasions. Its high pixel density and excellent display effect make the picture more vivid and lifelike, bringing excellent visual experience to the audience.

Answer 3

The P4 LED display is a high-definition display with a dot pitch of 4mm, high pixel density and delicate display effect.

It is widely used in indoor places such as shopping malls, conference rooms, stage performances, etc., and can present clear and bright images and text.

The P4 LED display has the characteristics of low power consumption, long life, easy maintenance, etc., and supports multiple playback modes and functions, such as split-screen playback and remote control, providing users with flexible and diverse usage experience. At the same time, its high cost performance also makes it one of the preferred products for large-area display screens.

Answer 4

The P10 LED display is a 10mm pixel pitch LED display, which is widely used in outdoor advertising, stadiums, conference rooms and other scenes.

It has the characteristics of high brightness, wide viewing angle, energy saving and environmental protection, long life, etc., which can meet the display requirements of different needs.

The pixel pitch of the P10 LED display is moderate, which is suitable for long-distance viewing. At the same time, its bright colors and high contrast can present clear and realistic images and video effects.

In addition, the P10 LED display also has the advantages of easy installation and maintenance, which can bring convenient use experience to users.