Question

What factors influence the price of a P6 LED display (such as brand, size, and configuration)?

Answer 1

Brand, size, and configuration (such as chips, driver ICs, and packaging technology) are the three core factors affecting the price of P6 LED displays.  Differences in configuration alone can lead to price differences of over 1,000 RMB per square meter for products of the same specifications.

A P6 LED display refers to an LED display product with a pixel pitch of 6 millimeters, widely used in outdoor advertising, stage rentals, shopping mall displays, and other scenarios. Its "bare screen" price is not fixed, but determined by a combination of hardware, software, and engineering factors. Market prices range from 3,000 RMB/㎡ to nearly 10,000 RMB/㎡, mainly due to differences in configuration and brand.

Key Factors Affecting P6 LED Display Price

1. Configuration: The core determinant of quality and cost

LED chip (light bead) brand: Directly affects color consistency, brightness, and lifespan. Products using imported chips such as Cree (USA) and Nichia (Japan) can be 2-4 times more expensive than those using Epistar (Taiwan) or Nationstar Optoelectronics (China) chips.

Driver IC brand: Controls signal stability and refresh rate. High-end products often use brands such as MBI (Taiwan) and Toshiba, avoiding issues like screen flickering and color distortion.

Packaging technology:

Surface Mount Device (SMD3528): Provides fine image quality, suitable for medium to close-range viewing, and is the mainstream choice.

Dual In-line Package (DIP): High brightness and good waterproofing, suitable for long-distance outdoor environments.

Power supply and cabinet materials: Power supplies from brands like Mean Well and Chuanglian are more stable; die-cast aluminum cabinets are more durable than sheet metal but more expensive. [Chuanglian power supply system]

2. Brand: Represents quality assurance and service guarantee

Well-known brands (such as Leyard, Unilumin, and LianShuo) generally have higher prices due to strict quality control and comprehensive after-sales service.

Smaller manufacturers may reduce costs by using substandard LED chips and simplifying circuit design, leading to risks of dead pixels and color differences.

3. Size and Area: Affects overall cost and supporting costs

The larger the area, the more modules, receiving cards, and steel frame structures are needed, resulting in a higher total price.

Large-area projects usually receive a unit price discount, but additional transportation and installation costs need to be considered. 4. Other Important Factors

Installation Method: Floor-standing, suspended, embedded, etc., vary in complexity, affecting construction difficulty and material costs.

Control System: Synchronous control systems require sending and receiving cards; the brand (e.g., Nova, Colorlight) and quantity affect the price.

Engineering Surcharges: Including steel structure, power distribution cabinets, lightning protection systems, transportation and installation, taxes, etc., often accounting for 20%-30% of the total cost.

Raw Material Origin: Imported chips have a significant price difference compared to domestic chips, and offer higher performance stability.

Below is a comparison of common P6 LED display configurations and price ranges:

Economical: Domestic/non-standard, ordinary IC, surface-mount or through-hole, price range 3,000 – 4,500; low cost, suitable for projects with limited budgets, but may have color difference risks.

Standard: Taiwanese Epistar, Nationstar, MBI series, surface-mount three-in-one, price range 4,500 – 6,500; mainstream commercial choice, stable display, high cost-effectiveness.

High-end: Cree, Nichia, high-end MBI models, COB/IMD advanced packaging, price range 7,000 – 10,000+; ultra-high reliability, long lifespan, suitable for important commercial venues.

In actual procurement, the "turnkey project price" usually includes all costs, including the screen body, control system, structural frame, installation and commissioning. It is recommended to request a detailed quotation list from the manufacturer for comparison.

✅ Recommendations

When purchasing a P6 LED display, you should first clarify the usage scenario (indoor/outdoor), viewing distance, and budget range, and then focus on the brand and configuration of the chips and driver ICs, rather than just comparing the unit price. Choose a supplier with a good reputation and request aging test reports and warranty commitments (usually 2-3 years) to ensure long-term stable operation.

Answer 2

The price of a P6 LED display screen is influenced by several factors, and different configurations and requirements can lead to significant differences in the final quote. Below are the main influencing factors and their impact on price:

1. Brand and Quality

International major brands (such as LG, Samsung, Unilumin, Leyard, Absen): Relatively higher prices, stable quality, and good after-sales service.

Domestic brands (such as Unilumin, Leyard, Hongli Zhihui, etc.): High cost-effectiveness, but quality and stability still vary among different brands.

Unknown/low-end brands: Cheaper prices, but may affect display quality, lifespan, and after-sales service.

Brand premium can account for 10%-30% or even more of the total cost.

2. Size and Area

LED screens are usually priced per square meter (㎡).

The larger the screen, the unit price may decrease slightly (larger volume, better cost sharing), but the total price increases linearly with the area.

Example:

A 10㎡ screen has a higher total price than a 2㎡ screen, but the price per unit area may be lower.

3. Resolution & Pixel Pitch

The "6" in P6 refers to a pixel pitch of 6mm. It is less sharp than P4 or P2.5 displays and is suitable for medium to long-distance viewing, therefore the price is lower than high-resolution screens. Pixel pitch is one of the core parameters affecting the price and display effect of LED screens.

Generally, the smaller the pixel pitch, the more pixels per unit area, the finer the image, and the higher the requirements for LED chips, driver ICs, control systems, and manufacturing processes. Therefore, the cost and price will increase significantly.

Compared to small-pitch screens like P4 and P3, P6 has slightly lower display accuracy and is more suitable for medium to long-distance viewing (such as the back rows of conference rooms, shopping mall atriums, outdoor advertising spaces, etc.), so the overall price is at a medium level.

In short:

Smaller pixel pitch → Higher resolution → Higher cost → Higher price

Larger pixel pitch → Lower display requirements → Lower cost → Lower price

Smaller pixel pitch → More pixels per unit area → Higher cost → Higher price.

4. Module Configuration and Performance

Specific configurations affecting the price include:

Driver IC and Chip

Good driver chips improve brightness, refresh rate, and grayscale levels.

High refresh rate (≥3840Hz) and high grayscale support → higher cost.

Power Supply and Cooling Solution

Efficient power supply and good heat dissipation design improve stability and lifespan.

Dustproof and waterproof design (e.g., IP65 for outdoor use) costs more.

Cabinet Material and Craftsmanship

Aluminum alloy cabinets are lighter and more expensive than steel ones.

Moisture-proof and corrosion-resistant processes also affect the price.

️ 5. Indoor / Outdoor Use

Outdoor LED screens: require waterproofing, sun protection, and dustproofing → significantly higher price than indoor screens.

Indoor LED screens: have lower environmental protection requirements → cheaper price.

Outdoor P6 screens are 15%-40% more expensive than indoor screens of the same specifications.

⚙️ 6. Control System and Software

High-quality control cards, processors, and content management systems (CMS) increase costs.

Real-time video, splicing, and multi-machine control functions also affect the price.

7. Installation and Additional Services

The price includes not only the screen itself, but also:

Transportation costs

Installation and commissioning fees

Structural brackets

Cables and accessories

After-sales warranty plan

❗ Some brands offer full machine warranty + on-site service, which is more expensive but more convenient.

8. Purchase Quantity and Negotiation Space

Large-volume purchases usually have larger discounts.

Single-unit purchases are more expensive.

✨ Main Factors Affecting the Price of P6 LED Displays

Overall, the price of a P6 LED display is not determined by a single factor, but rather by the combined effect of multiple conditions.

Among them, brand, display area, and pixel pitch/resolution have the most significant impact on price, often determining the overall price range.

Secondly, the performance configuration of the screen (such as driver IC, refresh rate, brightness, grayscale level), indoor or outdoor use environment, cabinet structure, and material craftsmanship will all contribute to price differences to varying degrees.

In addition, control system functions, installation and construction, transportation methods, and after-sales service duration will also be reflected in the final quotation.

Finally, the purchase quantity and project scale are also important factors. Generally, the larger the area and the higher the production volume, the greater the potential for a lower price per square meter.

The price of a P6 LED display is a comprehensive result of: brand positioning + display specifications + hardware configuration + usage environment + service costs + purchase volume.

Reference Price Range (Example, for reference only)

⚠️ Market fluctuations and regional differences can cause significant price variations. The following are typical ranges:

Type | Price/㎡ (RMB)

Indoor P6 | ~1500–3000 RMB/㎡

Outdoor P6 | ~2500–4500 RMB/㎡

Answer 3

The price of a P6 LED display screen is influenced by multiple factors, including brand, size, configuration, features, and market conditions.  A detailed analysis is as follows:

1. Brand Factors

Well-known brands (such as Leyard, Unilumin, etc.) typically have higher prices, with a premium of approximately 20%-40%. Their advantages lie in strong R&D capabilities, advanced manufacturing processes, strict quality control, and a comprehensive after-sales service system, providing longer warranty periods and more timely technical support.

Small or unknown brands have relatively lower prices, but careful selection is necessary. Some brands may reduce costs (e.g., by using low-quality LED chips or driver ICs) to lower prices, but this may lead to poor display quality, shorter lifespan, or higher failure rates.

2. Size Factors

The larger the area, the lower the unit cost (economies of scale). For example, the unit price of a 10-square-meter P6 display screen may be lower than that of a 5-square-meter product of the same type, because large-scale orders can spread fixed costs (such as R&D, molds, transportation, etc.).

Special sizes or irregular shapes (such as curved, circular, or irregular shapes) require custom cabinets or steel structures, increasing costs by more than 20%. For example, irregularly shaped screens require separate molds and are more difficult to install, resulting in significantly higher prices than standard rectangular screens.

3. Configuration Factors

Core Components:

LED Chips: LED chips with imported high-end chips (such as CREE, Nichia) have high brightness, good color reproduction, and long lifespan, but their price is 2-3 times that of ordinary domestic chips.

Driver ICs: High-quality driver ICs (such as Macroblock, Mingwei) provide more precise current control and higher refresh rates (e.g., ≥3840Hz), reducing scanning lines in images, but their price is 30%-50% higher than ordinary ICs.

PCB Boards: Multi-layer high-quality PCB boards (such as 4-6 layers) cost more than ordinary double-layer boards, but they improve signal transmission stability and heat dissipation performance.

Power Supply: High-efficiency and stable power supplies (such as Mean Well, Chuanglian) are more than twice the price of inferior power supplies, but they can prevent display screen failures caused by voltage fluctuations.

Cabinet Material: Die-cast aluminum cabinets are more durable (rust-proof, shock-resistant) than sheet metal cabinets, but their price is 20%-30% higher. Steel Structure: The cost of the steel structure for large outdoor screens is affected by the installation location (e.g., high-altitude work required for building facades), screen size, and frame structure, and may account for 10%-20% of the total cost.

4. Functional Features

Automatic Brightness Adjustment: Dynamically adjusts brightness based on ambient light intensity, requiring a light sensor, increasing the cost by approximately 10%.

Waterproof and Dustproof Rating: Outdoor screens require an IP65 or higher rating, necessitating the use of sealing rings and waterproof connectors, resulting in a 15%-25% higher cost than indoor screens.

Smart Interactive Functions: Such as facial recognition, motion capture, and touch interaction, require additional investment in sensors, cameras, and software algorithms, increasing the cost by 30%-50%.

High Refresh Rate and HDR Effect: Displays with a refresh rate of ≥3840Hz and HDR support improve dynamic image smoothness and color depth, but require high-end driver ICs and video processors, increasing the cost by 10%-30%.

5. Market Conditions

Supply and Demand: If there is ample supply of P6 displays on the market, the price may be relatively low; if supply is tight (e.g., due to chip shortages or rising raw material prices), the price may increase.

Competition: In a highly competitive market, manufacturers may attract customers through price reductions or value-added services (such as free installation and extended warranties), leading to price fluctuations.

Answer 4

The price of P6 LED displays is influenced by multiple factors, including brand, size, and configuration, as detailed below:

I. Key Influencing Factors

Brand and Quality

Well-known brands (such as those from the US and Japan) have significantly higher prices than domestic products due to their technological patents and after-sales service advantages. High-quality chips and precise manufacturing processes directly increase costs.

Size and Resolution

Size: The larger the screen, the more modules, brackets, power supplies, and other materials are required, increasing transportation and installation costs, and the price increases linearly with the area.

Resolution: High resolution (such as 4K) requires more pixels and drive circuits, increasing manufacturing complexity and leading to higher prices.

Pixel Pitch and Technical Configuration

P6 pixel pitch is considered medium-level, but if combined with high brightness, high contrast, or high refresh rate configurations, the price will increase significantly. For example, outdoor P6 screens require waterproof and dustproof technology, making them more expensive than indoor products of the same specifications.

Application Scenario

Outdoor P6 screens require weather protection (such as waterproofing, dustproofing, and UV resistance), making them 30%-50% more expensive than indoor screens.

Control System and Accessories

High-end control systems (such as intelligent dimming and remote monitoring) and high-quality power supplies and cabinets (such as die-cast aluminum) will increase costs, but improve stability and lifespan.

II. Price Range Reference

The price range for P6 LED displays is quite broad, depending on the configuration:

Basic models: Approximately 30,000-50,000 RMB/㎡ (suitable for general commercial scenarios).

High-end models: Can reach hundreds of thousands of RMB/㎡ (including high brightness, outdoor protection, and intelligent functions).

III. Purchasing Suggestions

Clearly define the usage environment (indoor/outdoor) and functional requirements (e.g., whether a touchscreen is needed), and prioritize selecting the appropriate pixel pitch and protection level.

Compare the cost-effectiveness of different brands and models, and pay attention to after-sales service and technical support.

Answer 5

The price of P6 LED displays is influenced by a combination of factors.  The following is an analysis of the main factors:

- Brand and Quality: Well-known brands (such as Leyard and Unilumin) typically have prices 20%-40% higher than smaller manufacturers due to their technological expertise and superior after-sales service, but their products offer greater stability and more reliable warranties.

- Specifications and Parameters: Pixel pitch (P6 is a fixed value) determines pixel density and directly affects cost; larger sizes (area) require more modules, resulting in a proportional increase in price. Higher resolution (requiring more LEDs) and higher brightness requirements (e.g., ≥5000 cd/m² for outdoor use) also increase costs.

- Configuration and Components: The brand and performance of components such as the control system (e.g., sending and receiving cards), power supply, and driver ICs affect the price. High-end configurations (such as high refresh rate and front-maintenance structure) will increase costs.

- Application Scenario and Installation: Indoor and outdoor screens differ in protection levels (e.g., IP65) and heat dissipation requirements, with outdoor screens typically costing 30%-50% more. Installation methods (fixed/rental), the complexity of the steel structure, labor, and logistics costs also significantly impact the total price.

- Market and External Factors: Fluctuations in raw material prices (such as the high cost of imported chips), supply and demand, and tax policies all have an indirect impact on the final price.

Answer 6

The price of P6 LED displays is influenced by several factors, the main ones being:

1. Brand Factors

• Brand Recognition and Reputation: Well-known brands (such as Leyard, Unilumin, Absen, etc.) usually offer better quality control, technological research and development, and after-sales service, resulting in higher prices. Smaller or emerging brands may attract customers by lowering prices, but product quality and stability may vary.

• Market Positioning: Products from high-end brands may have stricter material selection and manufacturing processes, resulting in prices that are 15%-20% higher than those of mid-range and low-end brands.

2. Size Factors

• Area Size: The larger the display area, the more LED beads, circuit boards, cabinets, and other materials are needed, increasing costs accordingly. For example, the price of a 10-square-meter P6 display may be about 10 times that of a 1-square-meter display, but due to economies of scale, the price per unit area may be slightly lower.

• Module Specifications: Different module sizes (such as 192mm×192mm, 320mm×160mm, etc.) affect splicing efficiency and production costs. Larger modules may be slightly more expensive due to the complexity of the manufacturing process.

3. Configuration Factors

• LED Bead Quality: Displays using LED beads from internationally renowned brands such as Cree and Nichia have slower light decay, higher brightness, and better color reproduction, resulting in prices 20%-30% higher than products using ordinary LED beads.

• Driver Chip: High-quality driver chips (such as the MBI series from Macroblock) can improve display stability, refresh rate, and grayscale levels, increasing costs by 10%-15% compared to ordinary chips.

• Refresh Rate and Grayscale: P6 displays with high refresh rates (≥1920Hz) and high grayscale levels (≥16bit) can avoid screen flickering and achieve more natural color transitions, resulting in prices 8%-12% higher than products with standard configurations.

• Protection Rating: For outdoor P6 displays requiring an IP65 protection rating (dustproof and waterproof), the cost of cabinet sealing technology and materials will increase by 5%-8%.

4. Installation and Environmental Factors

• Installation Method: Wall-mounted installation is less expensive, while complex installation methods such as pole-mounted or suspended installations (requiring steel structures or high-altitude work) will increase costs by 3%-15%. • Operating Environment: Outdoor LED displays need to withstand strong sunlight, wind, and rain, requiring higher brightness and protection performance, resulting in a price 20%-50% higher than indoor displays.

5. Function and Customization Requirements

• Special Functions: If features such as touch interaction, 3D display, or remote control are required, additional hardware and software development costs will be incurred, potentially increasing the price by 20%-60%.

• Shape Customization: Curved, circular, or other irregularly shaped screens, or transparent screens, require new molds or special materials, resulting in a price 30%-80% higher than standard P6 LED displays.

In summary, the price of P6 LED displays varies significantly depending on factors such as brand, size, configuration, installation environment, and customization requirements.  The specific price needs to be confirmed with the supplier based on actual project needs.

Answer 7

The price of a P6 LED display is not a fixed value, but rather a complex system determined by multiple factors such as brand, technical configuration, application scenario, and purchase volume. According to search results, the price per square meter varies widely, ranging from approximately 1500 yuan to 12000 yuan. The following are the main factors affecting its price:

I. Core Price Influencing Factors

Brand and Quality

Brand is the primary factor influencing price. First-tier well-known brands (such as Leyard and Unilumin mentioned in the search results) typically have prices 20%-40% higher than second- and third-tier brands due to their mature technology, stable quality, and comprehensive after-sales service. For example, for the same specifications of a P6 screen, Leyard's quote can reach 8600 yuan/square meter, while other brands may be in the 3000-5000 yuan/square meter range.

Key Technology and Configuration Parameters

The internal configuration of the display screen directly determines the cost and final selling price, mainly including:

LED Chips: Screens using imported chips (such as Cree and Nichia) are more expensive than those using domestically produced chips.

Brightness and Protection Level: Outdoor screens require high brightness (usually ≥700cd/㎡) and a higher protection level (such as IP65), which costs approximately 30% more than indoor screens (lower brightness requirements, protection level such as IP30).

Refresh Rate: A high refresh rate (such as ≥3840Hz) provides smoother dynamic images, and the technical requirements and costs are correspondingly higher.

Cabinet Structure: Waterproof and dustproof cabinets for outdoor screens (such as die-cast aluminum cabinets) are more durable than simple indoor cabinets or sheet metal cabinets, and are therefore more expensive.

Application Scenarios and Additional Requirements

Indoor vs. Outdoor: For the same pixel pitch, outdoor screens are usually more expensive than indoor screens because they need to meet stringent environmental requirements such as waterproofing, lightning protection, and high-temperature resistance. For example, quotes from the Nanjing area show that outdoor P6 screens cost approximately 3000-5000 yuan/㎡, while high-density indoor screens may reach 5000-8000 yuan/㎡.

Supporting Systems: A complete display screen system includes not only the screen itself, but also the control system, control computer, power distribution cabinet, audio amplifier, video processor, etc. Whether these supporting equipment and their brand quality are included significantly impacts the total price. A package including installation, commissioning, and long-term maintenance services may cost 30%-40% more than the bare screen price.

Procurement Scale and Customization Level

The procurement area directly affects the unit price. Large-scale purchases (such as over 100㎡) usually receive a 15%-25% discount; while small-scale purchases (such as less than 5㎡) may see a 10%-20% increase in unit price due to the allocation of fixed costs. In addition, special shapes (such as curved, spherical, or other irregular screens) or special functions will also incur additional costs.

II. Price Range Reference for Different Scenarios

Based on information from multiple sources, the price of P6 full-color LED displays can be broadly categorized into the following ranges:

Application Scenario Price Range (RMB/square meter) Description

Outdoor Full-Color P6 3000 - 12000 The price range is wide, mainly affected by brand, configuration (such as waterproof rating, brightness), and supporting systems.

Economical configurations may be 3000-5000 RMB, mid-to-high-end brands and configurations can reach over 6000 RMB, and top-tier brands' high-end products can approach or exceed 10000 RMB.

Indoor Full-Color P6 3500 - 12000 Indoor screens have lower protection requirements, but high-density, high-refresh-rate products are also expensive.

Regular quotes are mostly between 3500-8000 RMB, with some high-end or special models (such as flexible modules) costing more.

Rental Use P6 Charged per event/day, usually not sold by area, but packaged and charged based on rental duration and area.

The reference price is approximately 100-150 RMB per square meter per day, usually including transportation and installation services.

III.  Purchasing Considerations

When evaluating prices, in addition to comparing unit prices, you should also pay attention to the following aspects to ensure value for money:

Request a pixel-by-pixel calibration report to ensure uniform screen color and avoid color difference problems.

Clearly define the warranty scope and duration, such as the warranty period for core components such as LED chips, power supplies, and control systems. Consider the long-term operating costs, including power consumption (outdoor high-brightness screens can consume 500-800W per square meter) and maintenance costs (approximately 10%-20% of the initial purchase price).

Answer 8

LED display screen prices vary depending on factors such as brand, size, pixel density, and features. How much does an LED display screen cost per square meter?

Generally, LED display screen prices range from 4000 to 15000 RMB per square meter. High-end LED display screens may cost more, while low-end ones may cost less.

For example, outdoor LED display screens like P6 and P8 may cost between 5000 and 8000 RMB per square meter; indoor LED display screens like P3 and P4 may cost between 6000 and 10000 RMB per square meter; and small-pitch LED display screens like P1.5 and below may cost as much as 40000 RMB per square meter or more.

The price of an LED display screen per square meter is mainly affected by the following factors:

1. Brand: Well-known brands of LED display screens usually have higher prices because they offer better quality, technology, and after-sales service. Smaller or unknown brands have relatively lower prices, but product quality and overall service cannot be guaranteed.

2. Model: The smaller the model number, the higher the pixel density, meaning more LED beads per square meter, resulting in a clearer display effect and a higher price. Generally, LED display screens with a pixel density below 10000 dots/square meter are cheaper, while those exceeding 10000 dots/square meter become increasingly expensive.

3. Size: The larger the LED display screen, the higher the price. Large screens require more LED modules and electronic components. For example, a 10-square-meter indoor LED display screen might cost around 100,000 RMB, while a 100-square-meter outdoor LED display screen might cost several hundred thousand RMB.

4. Features: The more features an LED display screen has, the higher the price. For example, playing 3D images or having interactive functions (face recognition, motion capture) requires customized video materials and additional investment in sensors and other equipment.

5. Materials and Craftsmanship: The materials and manufacturing process of the LED display screen's casing also affect the price. This directly impacts the stability of the LED display. High-end LED display screens use aluminum alloy casings and have a complete and rigorous production system and process for better quality control during manufacturing.

6. Market Conditions: Market supply and demand and competitive conditions also affect the price of LED display screens. If the market supply is abundant, prices may be relatively low; conversely, if the market supply is tight, prices may be relatively high.

From the "LED Display Price List" above, we know the components of LED display pricing:

1. Display Screen: Includes the LED display model and size/area. The number of sending and receiving cards is configured based on the screen area, and the control software is generally free. This calculates the total price of the screen.

2. Project System Equipment: Video processor costs; customers can provide their own servers.

3. Project Structure and Wiring Equipment: Includes power distribution cabinets for the screen, cables, and cooling equipment such as fans or air conditioners, which can be provided by the user. The screen structure includes steel structure fabrication and installation, which is usually arranged by the manufacturer.

4. Others: Including packaging costs (usually wooden crates are used for good protection), transportation and handling costs (e.g., land transport). Some customers have tight deadlines and may opt for air freight, but this is much more expensive and requires customer agreement and payment. Installation costs include labor and travel expenses, etc.

In summary, there is no fixed answer to the question of how much an LED display costs per square meter. LED display prices are affected by many factors, including model, size, brand, and functionality. Therefore, don't focus too much on low prices; low-priced products often have unstable performance and cannot meet your needs in terms of after-sales service. Frequent maintenance, time-consuming repairs, and constant troubleshooting will ultimately be counterproductive.

Answer 9

The price of LED display screens is affected by several factors.  The following is a detailed analysis:

I. Core Influencing Factors

Pixel Pitch

P1.2-P1.8 (Small Pitch): 8000-50000 RMB per square meter (e.g., P1.2 approximately 45,000 RMB/㎡)

P2-P3 (Indoor Standard): 3000-15000 RMB/㎡

P4-P10 (Outdoor): 2000-8000 RMB/㎡

Screen Type

Indoor Fixed Installation Screen: 5000-30000 RMB/㎡

Outdoor Waterproof Screen: 6000-25000 RMB/㎡

Rental Screen (Lightweight): 8000-40000 RMB/㎡ (including quick assembly/disassembly structure)

Brand Differences

High-end (e.g., Leyard, Unilumin): 20-35% higher than the industry average price

Mid-range (e.g., Lianjian Optoelectronics): Mainstream price range

White-label products: 30-50% lower price, but warranty period is usually ≤2 years

II. Supporting Costs

Control System

Sending Card: 2000-8000 RMB/card (different resolutions supported)

Receiving Card: 1 50-500 RMB/sheet (1 sheet needed for every 4-8 m²)

Steel Structure

Outdoor load-bearing structure: 800-3000 RMB/m² (including wind-resistant design)

Indoor simple frame: 200-800 RMB/m²

Auxiliary Systems

Cooling system (outdoor): 200-600 RMB/m²

Power distribution system: Calculated at 15-20% of total power

III. Typical Scenario Quotations

Conference Room Scenario (P1.8)

4K resolution (approximately 14 m²): Total price 350,000-600,000 RMB (including installation and commissioning)

Shopping Mall Atrium (P3)

30 m² curved screen: Total price 450,000-750,000 RMB (including steel structure)

Outdoor Advertising (P6)

100 m² display screen: Total price 800,000-1,500,000 RMB (including wind and lightning protection design)

IV. Hidden Costs

Transportation costs: 3-8% increase for projects in different locations

Maintenance contract: Annual maintenance fee is approximately 5-8% of the equipment price

Brightness attenuation: Outdoor screens require 20-30% brightness compensation after 3 years

It is recommended to provide specific usage scenarios, size requirements, and installation environment for a more accurate budget. Different suppliers' component sources (e.g., using Nichia/Nationstar LED chips) can lead to a price difference of more than 20%, so technical specifications should be clearly defined during the bidding process.